Pipe Repair products offer a fast, safe way to seal splits, holes, and corroded sections instantly – often under full system pressure – avoiding the need for expensive and time-consuming network shutdowns.
AquaGrip flange adaptors deliver secure, restrained connections to join a flanged fitting to PE pipes. Easily installed in any conditions, and meets Type 1 end load standards (sizes ≤450mm) and Type 2 end load standards for larger diameters.
Pressure Ratings
WaterWaste Water
DN225 to DN1600 = 16 Bar
Flange Drilling = To customer specification
Compatible Pipe Materials
Pipe Materials Caveats
AquaGrip Flange Adaptor 225-1600mm
Caveat 1
Fittings are SDR dependent, available for SDR11 (225-630mm), SDR17 & 21 (225-1000mm) and SDR26 & 33 (all sizes).
Have a technical question about this product or its application?
Our technical team is ready to answer your questions and guide you to the right solution.
Get Expert Help
AquaGrip Flange Adaptor 225-1600mm
Have a technical question about this product or its application?
Our technical team is ready to answer your questions and guide you to the right solution.
Complete and submit the form shown, and one of our technical specialists will respond to your enquiry within two working days.
"*" indicates required fields
A High Performance Polyethylene Pipe Jointing System
Simple Design
The AquaGrip range was developed in response to demand for a simple, high performance end load restraint mechanical method of joining polyethylene pipe. AquaGrip products are designed to support and grip PE pipe to prevent pipe collapse and pullout.
On the Spot Repairs
Another key benefit of the AquaGrip range is ‘all-weather installation’. It can be installed under wet conditions without shelters, and even under water. It is ideal for on-the-spot repairs – no need for fusion jointing equipment when unexpected problems arise!
Easy & Safe to Fit
The range requires no special skills or complicated tools to fit, a suitably calibrated torque wrench is the only specialist tool required. The ability to rotate the flange bolt holes and the lightweight, compact design provide easier handling and quicker installation.
High Performance
Once fitted the product range offers axial restraint and is designed and tested to meet the full Type 1 performance requirements of IGN 4-01-02 (formally WIS 4-24-01) in all sizes up to 450mm. Full Type 2 performance is achieved on larger sizes. It is designed to equal or exceed the pressure capabilities of MDPE (PE80) and HDPE (PE100) pipe and has total corrosion protection with Rilsan Nylon coated body and clamp bands.
Why Choose AquaGrip
Internal sealing design – Large flange adaptors seal inside the pipe for quick, reliable performance and greater customer confidence.
Expanded size range – Available in diameters up to 1600mm for maximum installation flexibility.
Flanged connection versatility – Easily links to other pipe materials, ideal for replacing sections or adding flanged fittings and valves.
Reduced‑bore flange options – Offered with cost‑saving flange combinations such as 315mm OD × 250mm and 500mm OD × 450mm.
Perfect for structural lining – Fully compatible with refurbishment methods including Swage‑Line®, RollDown® and Die Draw®.
High‑strength clamp design – Unique clamp bands lock onto the anchoring shoulder to deliver maximum end restraint.
Handles distorted pipe ends – Effectively overcomes the challenge of misshapen polyethylene pipes during installation.
Generous cutting tolerance – 40mm minimum tolerance compensates for imperfect pipe cutting on site.
WRAS approved and performance tested – Meets IGN 4‑01‑02 requirements: Type 1 up to 450mm and Type 2 for 500mm and above.
Design Benefits
Exceptional End Restraint
Uniquely designed clamp locks onto the anchoring shoulder, providing maximum end load restraint.
Reliable Seal
The flanged body incorporates an internal support liner which carries the double ridged gasket(s) that seals on the inside of the PE pipe. The inside of the pipe is well protected from casual on-site damage, so the seal remains secured.
Corrosion Resistance
Bolts, nuts and washers are plated in zinc, and then Grey Flurene® 177, a low friction coating which offers excellent corrosion resistance.
External Coating
The body, clamp band and liner are fully coated in Black Rilsan Nylon 11 which has excellent resistance to impact, abrasion, weathering and chemicals as well as good thermal stability and flexibility to accommodate for rough site handling. It is WRAS listed.
Water
Waste Water
